Engine Oil,Fluids & Lubricants

• Specially developed for motor sports.
• Suitable all year for gasoline and diesel engines under sporty use.
• Tested safe with catalytic converters and turbochargers.

APPROVALS:

• ACEA A3
• ACEA B4
• API SL
• API CF

LIQUI MOLY RECOMMENDS THIS PRODUCT FOR VEHICLES THAT NEEDS TO COMPLY THE FOLLOWING SPECIFICATIONS:

• Fiat 9.55535-H3

• For increasing the octane number of gasoline.
• The increase of the octane number ensures low fuel consumption.

DOT 4 quality proven millions of times

• Boiling point min - 250*C
• Wet boiling point min - 155*C
• Viscosity at - 40*C - max. 1400 mm2/s

• for large containers 25 kg, movable
  • Pneumatic grease pump 1:55 with intake pipe and pumping unit
  • Delivery: approx. 600 cc/min
  • High-pressure grease gun with Z-swivel
  • Dust cover, tank fastening and grease follower piston
  • Pressure relief valve and push-on nipple
  • Carriage
  • 4 m high-pressure hose

NB - Item available on Special order only, and customer 70% prepayment is required. 

• High-performance motor oil based on synthetic technology.
• Ensures maximum performance and protection of the engine under all operating conditions.
• Optimum lubrication, outstanding engine cleanliness, excellent friction and minimum wear are just as much taken for granted as gentle clutch engagement and disengagement and gear shifting.
• Tested on engines with catalytic converters.

• For thorough and gentle hand cleansing.
• Even removes stubborn soiling such as paint, oil and brake dust.
• Gentle on the skin and sparing in consumption.
• Dermatological tested.
• Thoroughly rub into dry hands and rinse off.

• Low-friction motor oil based on synthetic technology.
• Deposits are reliably prevented, superior lubrication reliability ensured and high fuel economy made possible.
• In regard to wear resistance the requirements of the older Ford standard WSS-M2C913-C are met and even exceeded in some aspects.
• Ford recommends its use for all engines for which oils of specifications WSS-M2C913-B, WSS-M2C913-C or WSS-M2C925-B were currently required.