Building & Plumbing

    -Rectangular Box

    -Vals at 0 ,45 and 90 degrees

    -Magnetic milled bottoms

Approved for

• Cracked concrete
• Non-cracked concrete

Can be used with all of the most common types of screws and screw diameters.

• 8 mm nylon plugs for push-through installations for fixing wooden structures.
• Also when slimmer frame plug and smaller loads are required.
• Cr VI-free coating of the screw.
• ZP for dry indoor and temporary outdoor use.

• Preassembled with nailscrew, ready-to-install nylon speedplugs for hammer-in -type through fixings.
• Nailscrew head with pozidrive slot for removing or adjusting the anchor.
• Plug collars function as plastic insulating washers thus preventing touch-corrosion from taking place.
• ZP for dry indoor and temporary outdoor use.

• Universal polyethylene plug with collar for pre-installation in all types of base materials.
• Due to knotting YLT can be used in most base materials.
• Collar prevents the plug from slipping into the drill hole.
• Suitable for wood and chipboard screws.
• Suitable conditions related to screw material: ZP for dry indoor and temporary outdoor use; HGD/MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use.

• Multipurpose quality nylon plugs for push-through and pre-installations in solid base materials.
• Suitable for wood and chipboard screws, double threaded screws, adjustable frame screws and other spacing screws
• Suitable screw length = plug length (L) + fixture thickness (tfix) + 5 mm.
• Temperature range in use -40 °C to +80 °C.
• Suitable conditions related to screw material: ZP for dry indoor and temporary outdoor use; HGD, MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use.

• Fastening of tilt and turn fittings in regular and thin-walled PVC profiles and in steel or GRP inserts
• Fixing locking plates, strips and bearings.