• Universal polyethylene plug with collar for pre-installation in all types of base materials.
• Due to knotting YLT can be used in most base materials.
• Collar prevents the plug from slipping into the drill hole.
• Suitable for wood and chipboard screws.
• Suitable conditions related to screw material: ZP for dry indoor and temporary outdoor use; HGD/MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use.

• Preassembled with nailscrew, ready-to-install nylon speedplugs for hammer-in -type through fixings.
• Nailscrew head with pozidrive slot for removing or adjusting the anchor.
• Plug collars function as plastic insulating washers thus preventing touch-corrosion from taking place.
• ZP for dry indoor and temporary outdoor use.

• 8 mm nylon plugs for push-through installations for fixing wooden structures.
• Also when slimmer frame plug and smaller loads are required.
• Cr VI-free coating of the screw.
• ZP for dry indoor and temporary outdoor use.

Can be used with all of the most common types of screws and screw diameters.

For fixing reinforced steel up to 3.0 mm in PVC windows with tight fitting reinforcement

• Efficient spaced fixing of windows and doors
• Especially suited for PVC outer Frame without reinforcing steel rods
• Direct fastening of plastic and wooden windows in masonry and concrete, without any anchors.

• To fix roofing membrane to substructures made of sheet steel ≥ 0.75 mm ≤ 1 mm.
• For combination with EJOT® stress plates.

This screw is best for fastening of additional profiles, e.g. connecting profiles, expansion joints etc.

• Multipurpose quality nylon plugs for push-through and pre-installations in solid base materials.
• Suitable for wood and chipboard screws, double threaded screws, adjustable frame screws and other spacing screws
• Suitable screw length = plug length (L) + fixture thickness (tfix) + 5 mm.
• Temperature range in use -40 °C to +80 °C.
• Suitable conditions related to screw material: ZP for dry indoor and temporary outdoor use; HGD, MG and A2 for dry and humid indoor use, outdoor in rural areas only; A4 for indoor, outdoor and industrial use.

• Fastening of tilt and turn fittings in regular and thin-walled PVC profiles and in steel or GRP inserts
• Fixing locking plates, strips and bearings.