Product Description
The diamond cutting blade is intended for cutting tiles and stove tiles. It must not be used for lateral grinding. Before fitting the cutting blade, you need to inspect it for damage, as damaged blades must not be used. When fitting the blade, also pay attention to the arrow on the blade, which indicates the running direction. It must be possible to mount the cutting blade without using too much force. Make sure to always use the guard of the angle grinder. Before starting with the actual work, you should allow the cutting blade to run idle for approximately 30 seconds in order to determine if it is fitted correctly.
Applications
- Tiles
- Natural stones
- Granite
- Clinker
- Concrete
- Aerated concrete
- Roof tiles
- Masonry/Brickwork
- Chalky sandstone
- Firebrick
- Refractory brick
- Screed
- Asphalt