Makita HR5212C Rotary Hammer SDS -Max, 52 mm, 1510W, 10.9kg in Awka, Lagos

Details

HR5212C 52mm Rotary Hammer - SDS Max

Advanced Anti-Vibration Technology for Significantly Less Vibration
Powerful 15 AMP motor delivers 14 ft.lbs. / 19 J. of impact energy to handle the most demanding applications
Advanced Anti-Vibration Technology (AVT) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
Advanced AVT includes an air actuated counterbalance that directs air pressure from the crank and barrel room into the counterbalance cylinders to move counterweight pistons in the opposite direction of the hammer mechanism to effectively reduce vibration
Advanced AVT includes a vibration absorbing housing with a spring loaded back handle and housing which moves independently of the motor and hammer mechanism effectively isolating more vibration away from the user
Advanced AVT includes an integrated damper spring at the base of the impact bolt engineered to absorb impact vibrations from the drill bit
Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
Soft start suppresses start-up reaction for more control and better accuracy
"No hammering when idling" function automatically reduces the speed of the motor which helps increase tool life and performance
Variable speed control dial enables user to match the speed to the application for greater versatility
Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
L.E.D. power light indicates switch failure or cord damage
L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
Automatic brush cut-off protects commutator from damage for longer tool life
2-mode operation for "Chipping Only" or "Hammering with Rotation"
Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
24 bit angle settings allow the bit to be set at different positions for operating convenience
One-touch sliding chuck for quick bit changes

Includes a 16.4 ft. power cord for user convenience
Includes:

(1) DEPTH ROD, HR4013C (331955-1)
(1) Hammer Bit Grease (194683-7)
(1) CLOTH F/WIPING OIL (443122-7)
(1) D-handle (417003-1)
(1) Straight Handle (454781-2)
(1) Straight Handle Assembly (135629-4)

Product Sheet


Specifications
Shank type	SDS max
Capacities	Max / Optimum
- Concrete	52mm / 31mm
- Concrete (Core bit)	160mm / 96mm
Impacts per minute	1,100-2,250ipm
No load speed	150-310rpm
Joules	19.1j
Overall dimensions	599mm
Net weight	11.9kg
Continuous rating input	1,510W
Power supply cord	5.0m
Carbon brush	175