Tools

This EJOT socket wrench insert is for fastening all EJOT fasteners with hexagon head.

• Approved for cracked concrete and non-cracked concrete
• Also suitable for pre-stressed hollow core slab, bricks and solid brick sandstone.

EJOT self-drilling screw is for fixing metal core and fittings to thickwalled and multi-ply PVC profiles and steel or aluminium reinforcements up to 4 mm thick.

• Up to 5 times higher fastening performance compared to conventional fastening solutions
• Fatigue-free working in upright position with consistently high installation performance
• Highest grade of reliability: EJOT Dabo® screw is always fastened at right angles to the roof surface

For safe, fast and efficient installation of EJOT® HTK 2G stress plates with EJOT Dabo® screws TKR, TKE and VHT-R.

Technical specifications

Characteristic values  LAL+6/ LAL+8/ LAL+10/ LAL+12

• Inside diameter of thread: M6/ M8 /M10/ M12
• Nominal drill diameter d0: 8mm/ 10 mm/ 12 mm/ 15mm
• Effective Embedment depth hef: 25mm/30mm/ 40mm/ 50mm
• Max. installation depth Ls,max: 11 mm/ 13 mm/ 16 mm/ 23 mm
• Min. installation depth Ls,min:6 mm/ 8 mm/ 10 mm/ 12 mm
• Through hole diameter in the attached part df: 7 mm/  9 mm/ 12 mm/ 14 mm
• Maximum Installation torque Tinst max: 4 Nm/ 8 Nm/ 15 Nm/ 35 Nm

Used to attach step irons in wastewater revision chutes. The special plastic sleeves prevent bimetallic corrosion between the step iron and the anchor.

This concrete drill bit is suitable for non-cracked concrete, cracked concrete and hollow-core slab.

Designed for big rotary hammers in professional use. It can be used in all rotary hammers with SDS MAX holder.

Suitable for sheet thicknesses 6-26 mm, requires a hollow cavity behind the sheet. Possible wall insulation material may complicate the installation.