Drill Bits & Accessories

• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits
• Pack of 10

• Magnetic drill stand with high holding power of the magnetic foot for safe working
• Ideal for working on vertical and slanted surfaces or overhead
• Mains socket for the drill with switch-on protection: the drill can only be switched on when the magnetic foot is active
• Connection bolt between GBM 32-4 Professional and drill stand enables precise drilling with core cutters

• HSS Step Drill M10-M40 (16 steps)
• High-speed steel (HSS) - ensures good cutting quality in virtually all materials
• Relief (axial and radial) - ensures maximum cutting performance and quiet running.
• Suitable for - cable glands

• 100% brand new and high quality. 
• Made from HSS-Co, heat treatment to it, high hardness, high wear resistance, high toughness, high bending strength, sharp edge, the best choice for processing stainless steel, better than ordinary step drill. 
• Unique step structure, a drill can punch out a variety diameters of holes.

• 4-cutter, vacuum brazing and hardening
• Long lifetime/No jamming in rebar
• Highly durable carbide
• Good lifetime/wear resistance
• Suitable for concrete and reinforced concrete, masonry
• Can be used in all rotary hammers with SDS-max holder
• Price/performance optimised 4-cutter

Drill Bosch SDS-plus-1, 25x400x460 mm

• A fast work rate for drilling holes of up to 13 mm in steel thanks to powerful 750 watt motor and high torque
• Precise work results due to compact, ergonomic design and metal keyless chuck
• Versatile applications thanks to 2-speed gearbox and speed preselection with setting wheel 

• Full flexibility – With its bit holder, drill chuck adapter, angle adapter, off-set angle adapter and rotary hammer adapter, the Bosch FlexiClick system provides the        optimum solution in every work situation
• Easy to operate – The Bosch FlexiClick adapters can be locked in 16 different positions (360°) without having to remove them from the cordless screwdriver
• Versatile – The unique rotary hammer adapter turns the drill/driver into a fully fledged rotary hammer

   N/B:  This is a standard item and does not come with 2 battery and charger.

Included in Set:

• 1 x 10.0mm
• 1 x 11.0mm
• 1 x 13.0mm
• 1 x 17.0mm
• 1 x 19.0mm
• 1 x 21.0mm
• 1 x 22.0mm
• 1 x 24.0mm
• 1 x 27.0mm

Specifications:

Length - 38mm
Shank - 1/2 inch