Power Tools

• Large workbench 641 X 737 mm with high cutting capacity
• Spindle lock for easy saw blade changes
• Safe storage for saw blade and assembly tool in the saw blade depot
• Patented “Square-Lock” parallel guide for absolutely accurate saw cuts
• Angle guide which can be integrated in the basic machine frame

• Compact, ergonomic shape for versatile grinding work
• Powerful 650 watt motor with soft start for fast work progress
• Little servicing required due to significantly improved carbon brushes
• New clamping system for a secure fit of the grinding stones to ensure precise work
• Double sealed ball bearing for long lifetime due to low dust sensitivity
• Direct cooling for high overload capability and long lifetime
• KickBack Stop: detects when the tool is jammed and shuts it down immediately
• Constant Electronic for constant speed, also under heavy load
• Cut-out carbon brushes for a high level of motor protection
• Rubber-bedded ball bearings for less vibration sensitivity when accessories are unbalanced
• Suitable for stationary use due to collar with 43 mm mount

• Powerful 1150 watt motor for high material removal rate
• With SDS quick-locking nut for rapid disc changes without tools
• Cut-out carbon brushes for a high level of motor protection
• Lock-off switch prevents inadvertent activation
• Triple-control safety switch
• Good handling, also for left-handers

• Extremely robust lever and spring construction for the highest work loads
• Powerful 2000 W motor with starting current limitation for fast work progress
• Tried-and-tested Bosch angle grinder motor provides superior product lifetime
• User-friendly quick clamping mechanism with continuously variable mitre angle setting up to 45°
• Vertical D-handle for ergonomic working
• Integrated handle for easy transport

• Large wheels and full front handle make for a very compact portable machine
• Fitted with F1-241 compressor pump unit for unbeatable reliability and performance
• 240L/minute capacity with a maximum working pressure of 10 bar (145 PSI)
• 1.5kW, 2HP Nuair electric motor
• 24 litre air tank capacity

• Option for Shamal - red or Nuair - Blue

• Fitted with a 1.2 Metre power cord and fused Plug.
• Capacity 255/9 L/min with a maximum working pressure at 10 bar (145 psi). Dimension - 800x390x750
• And come within warranty according terms of use.

Important - there is also the ABAC brand for the same model at an additional cost of 20%

• 200Lt 3HP Single-Stage Compressor

• Option for Shamal or Nauair available for this model not available.

Important - there is also the ABAC brand for the same model at an additional cost of 20% currently in stock.

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits
• Pack of 10

• Appropriate for hand-held angle grinders
• Maximum circumferential speed: 80 m/s (depending on rpm and disc diameter)

• Highly tear-resistant cotton fabric (type YX)
• Zirconia with fully synthetic resin bond
• Glass-fibre backing pad, bomb-shaped
• Especially suitable for working on stainless steel, steel, cast iron and sheet metal
• Powerful thanks to Zirconia/semi-friable aluminium oxide
• Consistently high material removal rate
• Long lifetime
• Angled version - for working on edges/welded seams and surface sanding at a work angle on 15-25°
• Vibration dampening