Power Tools

• Drill bits are cutting tools used to create cylindrical holes.
• Bits are usually connected to a mechanism, which rotates them and provides torque and axial force to create the hole.
• It is suitable for concrete, brick wall and metal drilling.

• Suitable for all soft and hard woods, even wet wood
• Ideal for use in ancillary building trade, for joiners and roofers
• Can be used in all drills with 13mm chuck
• For through-holes, pre drilling for rafter nails and for deep dowel holes
• Precision ground for accurate dimensional stability when drilling
• Fast drilling rate due to optimised flute geometry
• High break resistance, fine surface finish

• Suitable for all soft and hard woods, even wet wood
• Ideal for use in ancillary building trade, for joiners and roofers
• Can be used in all drills with 13mm chuck
• For through-holes, pre drilling for rafter nails and for deep dowel holes
• Precision ground for accurate dimensional stability when drilling
• Fast drilling rate due to optimised flute geometry
• High break resistance, fine surface finish

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 608 595 081) when working with HSS-G metal drill bits

• Large wheels and full front handle make for a very compact portable machine
• Fitted with F1-241 compressor pump unit for unbeatable reliability and performance
• 240L/minute capacity with a maximum working pressure of 10 bar (145 PSI)
• 1.5kW, 2HP Nuair electric motor
• 24 litre air tank capacity

• Option for Shamal - red or Nuair - Blue

• Fitted with a 1.2 Metre power cord and fused Plug.
• Capacity 255/9 L/min with a maximum working pressure at 10 bar (145 psi). Dimension - 800x390x750
• And come within warranty according terms of use.

Important - there is also the ABAC brand for the same model at an additional cost of 20%

• 200Lt 3HP Single-Stage Compressor

• Option for Shamal or Nauair available for this model not available.

Important - there is also the ABAC brand for the same model at an additional cost of 20% currently in stock.

• Twin drill bit made of high speed steel
• Manufactured to DIN338
• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8
• Shank equal to drill bit diameter
• Two-cutter, cylindrical, two flutes
• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics
• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge
• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter
• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits
• Pack of 10

• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10

• Twin drill bit made of high speed steel

• Manufactured to DIN338

• Right-hand cutting twist drill bit, Type N, 135° drill bit tip, split point manufactured to DIN 1412 C, diameter tolerance h 8

• Shank equal to drill bit diameter

• Two-cutter, cylindrical, two flutes

• Suitable for alloyed and non-alloyed steel up to a tensile strength of 900 N/mm², cast steel, cast iron, sintered iron, malleable cast iron, non-ferrous metals and hard plastics

• Precision ground - enables up to 40% faster drilling rate and up to 50% lower feed pressure than standard-ground HSS drill bits with a chisel edge

• Self centering split point drill tip means there is no need to pre-punch or pilot drill up to 10mm diameter

• Note: Use the universal cutting oil (2 607 001 409) when working with HSS-G metal drill bits

• Pack of 10